Hot Sales 0.5 Class Energy Monitoring Split Core Current Transformer 1: 2000 Manufacturer

The principle of current transformer is based on the principle of electromagnetic induction. The current transformer is composed of a closed core and windings. Its primary winding has a few turns, which are stringed in the line where the current needs to be measured. Therefore, it often has all the current flowing through the line. The secondary winding has a large number of turns, which is connected in series to the measuring instrument and the protection circuit. When the current transformer is working, its secondary side loop is always closed, so the impedance of the series coil of the measuring instrument and the protection circuit is very small, and the working state of the current transformer is close to short circuit. The current transformer is used to convert a large current on the primary side into a small current on the secondary side, and the secondary side cannot be opened.

Feature

1. Split core current transformer with interleaved joint and hinge structure
2. Wide range of sizes to accommodate all the existing installations
3. Split core CT current transformer
4. Epoxy Potting, Double-screw fastening
5. Wide inner window, allowing clamping of big cables or bus-bars
6. Test range: 5 to 1000A AC input, output of 0-10V(AC) or 0-5A
7. High accuracy and reliability
8. Test hole series size clamp leaker AC current transformer
9. Inherit the simple structure of the traditional C cores
10. Clamp-on core design, safer, easier installation, portable, don’t need to cut of the grid-power when adjust the inductance.
11. Energy conservation & environment protection, huge potential market

Application:

split-core current transformer AC current from 5 to 600 Amps passing through the center conductor. Split core CTs are designed for fast and easy installation.The split core design permits non-contact current measurements through magnetic field induction without requiring that the primary wire be taken offline and disconnected for CT installation.This method permits a safer,easy and portable current measurement.

Parameter:

diagram

HEMEI is a leading manufacturer of electromagnetic signal coupling, the domestic designer and manufacturer of magnetoelectric power conversion technology, has been committed to promoting the progress of signal coupling technology and passive power technology. The main products are magnetic coupling amplifiers, wave traps, power carrier signal coupling transformers, permalloy cores, electromagnetic loop coils, CT power supply, open and close current transformers and other products. Products are widely used in smart home appliances, energy management systems, smart meter reading systems, smart monitoring equipment, smart distribution equipment, etc. We are the supplier of Qualcomm, Huawei Hisilicon, ST Microelectronics, In addition, Permalloy and electromagnetic core products have the largest market share in the power distribution industry of the State Grid.

This power suply CT device is our newly developed product, which can used on 100V-220kv AC transmission line, the new product can be used as a continuously and stabely power supply device. Hemei also offer customers personal services contains OEM, ODM and OPM. We welcome sample order to test and check quality.