Online Temperature Measurement System for electric contacts is composed of wireless temperature sensor , transceiver and display unit.Temperature sensors are directly installed at the heating joint, sending temperature data to terminals
by wireless RFID technology.
Simple and flexible
1. The product is easy to install and use. There are various types
of temperature sensors suitable for different occasions. The
installation of the sensor will not affect or reduce the safety
performance of the equipment.
2. Our company has developed products for various applications and
a variety of networking solutions to facilitate the needs of
different customers.
3. According to the specific needs of customers, the company can
design corresponding programs specifically and specifically.
Effectiveness
1. It solves the labor intensity of regular on-site inspections of
the staff under the traditional method and the high cost caused by
the increase of staff.
problem.
2. It solves the problem of inaccurate temperature measurement in
traditional temperature measurement methods and large interference
factors caused by man-made and environmental factors.
3. Eliminate the occurrence of equipment failure due to equipment
heating, ensure the safe, reliable and continuous operation of the
equipment, and improve
Improve the economic benefits of the enterprise.
4. The system can detect and predict equipment failures in time,
eliminate equipment failures in advance, and reduce equipment
damage.
Bad, reducing the maintenance cost of the enterprise.
Power industry applications
Electrical equipment in operation usually works at high voltage and
high current. Certain defects in the equipment will cause abnormal
temperature rise of equipment components. Excessive temperature may
cause combustion, explosion and even equipment damage or quality
accidents. Shanghai Nanyue Electric's wireless temperature
measurement can monitor the frequent occurrence of electrical
equipment such as switch cabinets in real time, and can effectively
control the occurrence of electrical accidents in a timely and
effective manner.
①, high-voltage switchgear moving contacts, static contacts, cable
contacts and other temperature online monitoring;
②, low-voltage switchgear contacts, cable joints and other
temperature online monitoring;
③. Capacitors; online temperature monitoring of circuit breakers,
isolating switches, etc.;
④. On-line monitoring of the temperature of the cable joints of the
motor outlet box;
⑤, on-line monitoring of the temperature of the cable tunnel cable
surface, cable joints, cable interlayer, etc.;
⑥. On-line temperature monitoring of electrical nodes in
substations or outdoor important circuits;
⑦, on-line monitoring of the electrical node temperature in the
transformer;
⑧, online monitoring of the electrical node temperature in the
rectifier cabinet;
| inner diameter | Input Current | Turns ratio | Workload | Voltage | Output Power |
| 50*14mm | 2A | 4000T | 3.3K | 1.7V | 0.8mW |
| 50*14mm | 5A | 4000T | 3.3K | 3.2V | 3mW |
